Insert for a board game box

3D printing4 partsBeginner-friendlyNo supports

An insert with nine compartments for a square board game box of 280 × 280 mm inside: cards, pieces, dice and tokens each get a compartment of 91 × 91 mm, 43.8 mm deep. The insert is 279 × 279 × 45 mm – measure your box first – and comes in four parts that stand together in the box. Setting up a game gets quicker and nothing rattles around.

The file is made in your browser. We only count how often it is downloaded.

Size: 279 × 279 × 45 mm
Print time: ≈ 11 h 11 min
Filament: ≈ 296 g PLA
Parts: 4

Print settings

Material: PLA
Layer height: 0.2 mm
Infill: 15%
Walls: 2
Supports: none

Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.

Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.

Adjust it

Organizer: 279 × 279 × 45 mm
Each compartment inside: 91 × 91 × 43.8 mm
Split into 4 parts (2 × 2) so each fits the print bed. A1 goes front left. STL comes as a ZIP with one file per part.

This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.

Open in the generator