Gridfinity baseplate 2 × 2
15 min1 part
Gridfinity baseplate 6 × 6
3D printing4 partsBeginner-friendlyNo supports
A Gridfinity baseplate with 6 × 6 grid squares, 252 mm on each side, split for a 220 mm print bed into four parts of 3 × 3 squares. The parts are not joined: they lie side by side in the drawer, A1 at the front left, and every bin that stands across a seam keeps them in line. If the shorter side of your print bed is at least 252 mm, enter it in the generator and the plate prints in one piece.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 252 × 252 × 5 mm
- Print time
- ≈ 2 h 4 min
- Filament
- ≈ 55 g PLA
- Parts
- 4
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 6 × 6 units
- Split into 4 parts (2 × 2) so each fits the print bed. A1 goes front left. STL comes as a ZIP with one file per part.
This model comes from the “Baseplate for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity baseplate 2 × 2
Gridfinity baseplate 3 × 3
32 min1 part
Gridfinity baseplate 4 × 4
54 min1 part
Gridfinity baseplate 5 × 5
1 h 23 min1 part
Something wrong with this model? Report a problem