Gridfinity baseplate 2 × 2
15 min1 part
Gridfinity baseplate 3 × 3
3D printing1 partBeginner-friendlyNo supports
A Gridfinity baseplate with 3 × 3 grid squares, 126 mm on each side, with nine squares for your bins. It suits a desk drawer or a shelf compartment, for example with a 2 × 3 bin and a row of three 1 × 1 bins beside it. On a shelf or workbench, a few strips of double-sided tape or a piece of non-slip mat underneath stop the plate from sliding when you lift bins out.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 126 × 126 × 5 mm
- Print time
- ≈ 32 min
- Filament
- ≈ 14 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print flat, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 3 × 3 units
This model comes from the “Baseplate for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity baseplate 2 × 2
Gridfinity baseplate 4 × 4
54 min1 part
Gridfinity baseplate 5 × 5
1 h 23 min1 part
Gridfinity baseplate 6 × 6
2 h 4 min4 parts
Something wrong with this model? Report a problem