Gridfinity baseplate 2 × 2
15 min1 part
Gridfinity baseplate 5 × 5
3D printing1 partBeginner-friendlyNo supports
A Gridfinity baseplate with 5 × 5 grid squares, 210 mm on each side – the largest square plate that still fits a 220 mm print bed in one piece. Twenty-five squares fill a kitchen or workshop drawer and leave room for whole families of bins. The plate uses almost the entire bed, so check the usable area first: if clips or a purge line take up space, enter a smaller print bed in the generator and the plate is split into parts.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 210 × 210 × 5 mm
- Print time
- ≈ 1 h 23 min
- Filament
- ≈ 37 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 5 × 5 units
This model comes from the “Baseplate for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity baseplate 2 × 2
Gridfinity baseplate 3 × 3
32 min1 part
Gridfinity baseplate 4 × 4
54 min1 part
Gridfinity baseplate 6 × 6
2 h 4 min4 parts
Something wrong with this model? Report a problem