Gridfinity baseplate 2 × 2
15 min1 part
Gridfinity baseplate 4 × 4
3D printing1 partBeginner-friendlyNo supports
A Gridfinity baseplate with 4 × 4 grid squares, 168 mm on each side, that fits a 220 mm print bed in one piece. Sixteen squares are enough for a whole drawer layout, say four 2 × 2 bins or a mix of long, small and tall ones. Measure your drawer before you print: if it is noticeably larger than 168 mm, set “Size by” to “Drawer” in the generator, and the plate fills it exactly with an even border around the grid.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 168 × 168 × 5 mm
- Print time
- ≈ 54 min
- Filament
- ≈ 24 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print flat, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 4 × 4 units
This model comes from the “Baseplate for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity baseplate 2 × 2
Gridfinity baseplate 3 × 3
32 min1 part
Gridfinity baseplate 5 × 5
1 h 23 min1 part
Gridfinity baseplate 6 × 6
2 h 4 min4 parts
Something wrong with this model? Report a problem