Gridfinity baseplate 4 × 4 with magnet holes

3D printing1 partBeginner-friendlyNo supports

A 4 × 4 Gridfinity baseplate with a closed bottom and 64 holes for 6 × 2 mm magnets, four per grid square, right under the magnets of the bins. Bins with magnets sit much more firmly on it – useful in a tool case, a camper van or a drawer that gets yanked open. You do not have to fill all the holes at once: start with the squares you use most and add the rest later, and plain bins without magnets fit as well.

Calculated in your browser. Nothing is uploaded.

Size: 168 × 168 × 8.2 mm
Print time: ≈ 2 h 50 min
Filament: ≈ 86 g PLA
Parts: 1

Print settings

Material: PLA
Layer height: 0.2 mm
Infill: 15%
Walls: 2
Supports: none

Tip: Print flat, no supports needed. Press the magnets in after printing – first check with a bin magnet that they attract each other. A drop of glue holds them.

Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.