Gridfinity bin 1 × 1
37 min1 part
Tall Gridfinity bin 1 × 1
3D printing1 partBeginner-friendlyNo supports
A tall Gridfinity bin on a single grid square, 12 units high – twice the usual height. Long things stand upright in it and stick out just enough to grab: pens and markers on the desk, screwdrivers and files in the workshop, brushes in the hobby corner. Set it in a baseplate rather than loose on the table: held by its feet, it stands much steadier there, even with heavy screwdrivers inside.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 41.5 × 41.5 × 87.8 mm
- Print time
- ≈ 1 h 2 min
- Filament
- ≈ 22 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print with the opening up, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 1 × 1 units, 12 units high
- Inside: 39.6 × 39.6 mm, 77 mm deep
This model comes from the “Bin for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity bin 1 × 1
Gridfinity bin 2 × 1
59 min1 part
Gridfinity bin 1 × 2 with label tab and scoop
1 h 16 min1 part
Gridfinity bin 2 × 2
1 h 32 min1 part
Something wrong with this model? Report a problem