Box for a deck of playing cards
1 h 55 min2 parts
Star cutter for play dough
3D printing1 partBeginner-friendlyNo supports
A star cutter for play dough with a blunt 1.6 mm edge, so small hands can press it in without hurting themselves. The stars come out 60 × 57.2 mm; the cutter is 69.2 × 66.4 mm and only 12 mm high, easy for children to hold. The wide rim on top makes pressing comfortable – and it also works for biscuits.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 69.2 × 66.36 × 12 mm
- Print time
- ≈ 17 min
- Filament
- ≈ 6.6 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print as shown: rim on the bed, edge facing up, no supports needed. Use PLA or PETG, ideally one approved for food contact. Wash by hand in lukewarm water, not in the dishwasher. Layer lines can hold crumbs – to be safe, put cling film over the dough before cutting.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Cookie: 60 × 57.17 mm
- Cutter: 69.2 × 66.36 mm, 12 mm high
This model comes from the “Cookie cutter” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for a deck of playing cards
Box for game pieces with 6 compartments
3 h 28 min2 parts
Sidewalk chalk holder for four sticks
2 h 6 min1 part
Giant bolt and nut M20
45 min2 parts
Something wrong with this model? Report a problem