Box for a deck of playing cards
1 h 55 min2 parts
Playing card holder for children
3D printing1 partBeginner-friendlyNo supports
A long card holder for children and for anyone whose hands are full: the cards stand fanned out in the slot, tilted back at 70°, and stay easy to read. It is 180 mm wide – room for a whole hand – 21.5 mm deep and 25 mm high. The slot takes a stack of cards up to 3 mm thick, about ten cards. It prints standing as shown, without supports.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 180 × 21.52 × 25 mm
- Print time
- ≈ 1 h 11 min
- Filament
- ≈ 31 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. With PLA, 15 % infill and 3 walls (perimeters) it is sturdy enough; for a heavy tablet use 4 walls.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Stand: 180 mm wide, 21.5 mm deep, 25 mm high
- For devices up to 3 mm thick
- Angle: 70°
- Front lip: 6 mm
- Without cable opening
This model comes from the “Phone and tablet stand” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for a deck of playing cards
Box for game pieces with 6 compartments
3 h 28 min2 parts
Sidewalk chalk holder for four sticks
2 h 6 min1 part
Giant bolt and nut M20
45 min2 parts
Something wrong with this model? Report a problem