Gridfinity bin 1 × 1
37 min1 part
Low Gridfinity bin 4 × 2
3D printing1 partBeginner-friendlyNo supports
A long, low Gridfinity bin over 4 × 2 grid squares and 3 units high, with a stacking lip. Tools that should lie side by side fit well: tweezers, small pliers, side cutters and pens, at the electronics bench or in a shallow desk drawer. Put it at the front of a drawer with taller bins behind it: you see over the low tray and reach the back without lifting anything out.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 167.5 × 83.5 × 24.8 mm
- Print time
- ≈ 2 h 5 min
- Filament
- ≈ 62 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print with the opening up, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 4 × 2 units, 3 units high
- Inside: 165.6 × 81.6 mm, 14 mm deep
This model comes from the “Bin for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity bin 1 × 1
Gridfinity bin 2 × 1
59 min1 part
Gridfinity bin 1 × 2 with label tab and scoop
1 h 16 min1 part
Gridfinity bin 2 × 2
1 h 32 min1 part
Something wrong with this model? Report a problem