Gridfinity bin 1 × 1
37 min1 part
Low Gridfinity bin 3 × 3
3D printing1 partBeginner-friendlyNo supports
A low Gridfinity bin over 3 × 3 grid squares, only 3 units high, with a stacking lip – more tray than box. Flat things stay in view at a glance: keys and coins on the shelf, or the screws and small parts of a device you are taking apart. During a repair, lay the screws out in the tray in the order you remove them, and put them back in reverse order when you reassemble the device.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 125.5 × 125.5 × 24.8 mm
- Print time
- ≈ 2 h 16 min
- Filament
- ≈ 68 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening up, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 3 × 3 units, 3 units high
- Inside: 123.6 × 123.6 mm, 14 mm deep
This model comes from the “Bin for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity bin 1 × 1
Gridfinity bin 2 × 1
59 min1 part
Gridfinity bin 1 × 2 with label tab and scoop
1 h 16 min1 part
Gridfinity bin 2 × 2
1 h 32 min1 part
Something wrong with this model? Report a problem