Pieces for Nine Men's Morris
20 min9 parts
Hexagonal tokens for board games
3D printing30 partsBeginner-friendlyNo supports
Thirty hexagonal tokens for board games: as resources, life points, markers or extra pieces when some get lost. They are 22 mm across the flats, 25.4 mm across the corners and 3 mm thick, with chamfered edges. Print several sets in different colours – the hexagons lie neatly side by side on the table.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 25.4 × 22 × 3 mm
- Print time
- ≈ 1 h 6 min
- Filament
- ≈ 33 g PLA
- Parts
- 30
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 22 mm, no hole, 3 mm high
- Hex: 22 mm across flats, 25.4 mm across corners
- Pieces: 30
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Pieces for Nine Men's Morris
Box for a deck of playing cards
1 h 55 min2 parts
Box for game pieces with 6 compartments
3 h 28 min2 parts
Sidewalk chalk holder for four sticks
2 h 6 min1 part
Something wrong with this model? Report a problem