Gridfinity bin 1 × 1
37 min1 part
Gridfinity bin 3 × 1 with 3 compartments
3D printing1 partBeginner-friendlyNo supports
A long Gridfinity bin over three grid squares in a row, split into three compartments, 6 units high with a stacking lip. On the desk it keeps paper clips, drawing pins and rubber bands apart; in the bathroom drawer, hair ties, clips and bobby pins. It looks like three 1 × 1 bins but is one piece: you lift all three compartments out together and take them wherever you are working.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 125.5 × 41.5 × 45.8 mm
- Print time
- ≈ 1 h 31 min
- Filament
- ≈ 39 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print with the opening up, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 3 × 1 units, 6 units high
- Each compartment: 40.4 × 39.6 mm, 35 mm deep
This model comes from the “Bin for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity bin 1 × 1
Gridfinity bin 2 × 1
59 min1 part
Gridfinity bin 1 × 2 with label tab and scoop
1 h 16 min1 part
Gridfinity bin 2 × 2
1 h 32 min1 part
Something wrong with this model? Report a problem