Garden hose connector 13 to 19 mm
27 min1 part
Duct reducer 150 to 125 mm
3D printing1 partBeginner-friendlyNo supports
A reducer that joins a 150 mm and a 125 mm ventilation duct, with spigots on both ends and a 2.5 mm wall. It suits many cooker hoods with a 150 mm outlet whose duct through the wall is only 125 mm, and also tumble dryers, fans or grow tents. Secure flexible duct with hose clamps and seal the joints with aluminium tape; PETG copes better with warm, moist air than PLA. Not for flue pipes of heaters, boilers or stoves.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 149.7 × 149.7 × 62.5 mm
- Print time
- ≈ 2 h 41 min
- Filament
- ≈ 65 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing as shown, no supports needed. With 3–4 walls (perimeters) it becomes watertight; a hose clamp holds hoses on the barbs.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 149.7 mm diameter, 62.5 mm high
- Bottom: spigot for a pipe 150 mm inside, 25 mm long
- Top: spigot for a pipe 125 mm inside, 25 mm long
- Narrowest opening: 119.7 mm
This model comes from the “Pipe adapter” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Garden hose connector 13 to 19 mm
Ventilation duct reducer 100 to 125 mm
2 h 12 min1 part
Drain pipe reducer 40 to 32 mm
42 min1 part
Pond hose connector 25 to 32 mm
38 min1 part
Something wrong with this model? Report a problem