Star cookie cutter 70 mm
17 min1 part
Small heart cookie cutter 35 mm
3D printing1 partBeginner-friendlyNo supports
A small heart cookie cutter, 35 mm across, for bite-sized biscuits and for the window in sandwich cookies. Cut a large round biscuit, punch a little heart out of the top half and fill the pair with jam, so the red heart shows through. It also cuts hearts from fondant, marzipan or cheese slices; for Valentine's Day or a wedding, set a larger heart in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 43 × 38 × 15 mm
- Print time
- ≈ 9 min
- Filament
- ≈ 2.9 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print as shown: rim on the bed, edge facing up, no supports needed. Use PLA or PETG, ideally one approved for food contact. Wash by hand in lukewarm water, not in the dishwasher. Layer lines can hold crumbs – to be safe, put cling film over the dough before cutting.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Cookie: 35 × 30.01 mm
- Cutter: 43 × 38 mm, 15 mm high
This model comes from the “Cookie cutter” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Star cookie cutter 70 mm
Small star cookie cutter 40 mm
11 min1 part
Heart cookie cutter 60 mm
13 min1 part
Round cookie cutter 60 mm
14 min1 part
Something wrong with this model? Report a problem