Bolt and nut M8 × 30
18 min2 parts
Knurled thumb screw M10 × 25
3D printing1 partNo supports
An M10 screw with a large knurled head and 25 mm of ISO thread, made to be turned by hand without tools. It clamps jigs, stops and fences in the workshop, holds a lid or panel that you open often, or replaces a lost clamping knob. Together with a metal tee nut set into wood, it makes an adjustable stop that you loosen and lock in seconds – tighten it by hand only.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 24.97 × 24.99 × 33.5 mm
- Print time
- ≈ 19 min
- Filament
- ≈ 4.3 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.12 mm
- Infill
- 40%
- Walls
- 3
- Supports
- none
Tip: Print as shown: bolt standing on its head, nut lying flat, no supports needed. A layer height of 0.12–0.16 mm makes the thread cleaner. Printed bolts break more easily than metal ones – don't tighten them hard.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Thread: M10 × 1.5 mm
- Bolt: 25 mm thread, 33.5 mm overall
- Thread Ø: 9.8 mm (nominal 10 mm)
This model comes from the “Bolt and nut” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Bolt and nut M8 × 30
Hex nut M6
3 min1 part
Threaded rod M12 × 40
20 min1 part
Bolt and nut M16 × 50
39 min2 parts
Something wrong with this model? Report a problem