Bolt and nut M8 × 30
18 min2 parts
Hex nut M6
3D printing1 partNo supports
A printed M6 hex nut with ISO metric thread, 10 mm across flats and 5.2 mm high – the size of a standard steel nut. It fits metal M6 bolts and threaded rods, stands in for a lost nut, or holds parts where steel would rust or scratch. Both faces are countersunk, so it starts on the thread from either side and you don't have to check which way round it goes.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 11.55 × 10 × 5.2 mm
- Print time
- ≈ 3 min
- Filament
- ≈ 0.4 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.12 mm
- Infill
- 40%
- Walls
- 3
- Supports
- none
Tip: Print as shown: bolt standing on its head, nut lying flat, no supports needed. A layer height of 0.12–0.16 mm makes the thread cleaner. Printed bolts break more easily than metal ones – don't tighten them hard.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Thread: M6 × 1 mm
- Nut: 10 mm across flats, 5.2 mm high
- Thread Ø: 6.2 mm (nominal 6 mm)
This model comes from the “Bolt and nut” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Bolt and nut M8 × 30
Knurled thumb screw M10 × 25
19 min1 part
Threaded rod M12 × 40
20 min1 part
Bolt and nut M16 × 50
39 min2 parts
Something wrong with this model? Report a problem