Box for a deck of playing cards
1 h 55 min2 parts
Box for tokens and game coins
3D printing2 partsBeginner-friendlyNo supports
A box with a lid and five long compartments for tokens, game coins, chips and markers, sorted by type or value. Each compartment is 32.7 × 80 mm and 23.4 mm deep; inside the box is 170 × 80 × 30 mm. With the lid on it is 32.8 mm high and slides into most game boxes, so setting up and packing away get much quicker.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 173.2 × 176.4 × 31.2 mm
- Print time
- ≈ 3 h 43 min
- Filament
- ≈ 100 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 173.2 × 83.2 × 31.2 mm
- Inside: 170 × 80 × 30 mm
- With lid: 32.8 mm high
- Each compartment: 32.72 × 80 mm, 23.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for a deck of playing cards
Box for game pieces with 6 compartments
3 h 28 min2 parts
Dice box with six compartments
1 h 5 min2 parts
Dice tray with a rim
1 h 36 min1 part
Something wrong with this model? Report a problem